Product introduction:
Special-shaped carbon-carbon materials with high strength, high modulus and stable physical and chemical properties are prepared by laminating non-woven fabrics/woven fabrics and fber mats, combined with needle-punching technology, and densifed through a process that integrates molding and liquid-phase impregnation. They can be custom-produced according to customer needs.
Product advantages:
Short production cycle / Excellent ablation resistance and strong corrosion resistance.
Production process:
Preform Blank - Compression Molding & Shaping - Liquid-Phase Densifcation - High-Temperature Treatment - Machining - Finished Product.
Bottom Support Crucible Product for Puller Furnaces
|
Density g/cm3 |
Bending Strength MPa |
Tensile Strength Mpa |
Compressive Strength Mpa |
Interlayer Shear Strength Mpa |
Resistivity um·Ω |
Thermal Conductivity (Vertical Direction) W/m·K |
Ash Content ppm |
Graphitization Temperature ℃ |
Size mm |
| 1.3 | 100 | 140 | 120 | 20 | / | 6 | ≤200 | ≥2000 | d≤1100 |
The above data are representative values and are not guaranteed values.
